Search

Find your failure.

Showing 433 to 456 of 903 advisories.

• A seat belt component fitted to a seat significantly intrudes into a gangway and is likely to cause injury to a passenger

  Category: Seat belt installation checks . Reference 10.2 (v)

• Incorrect positioning of a lap belt or lap section of a three point belt, ie the belt lies across the stomach or forward of the top quarter of the thigh

  Category: Seat belt installation checks . Reference 10.2 (u)

• Upper anchorage of three point belt(s) less than 110mm from centre line of seat (see note T)

  Category: Seat belt installation checks . Reference 10.2 (t)

• Upper anchorage of three point belt less than 475mm above uncompressed seat cushion measured parallel to the seat back (see note T)

  Category: Seat belt installation checks . Reference 10.2 (s)

• Free movement for a looped belt more than 25mm at the anchorage

  Category: Seat belt installation checks . Reference 10.2 (r)

• Tracking for seats and wheelchairs insecure (see note R)

  Category: Seat belt installation checks . Reference 10.2 (q)

• On a seat fitted to a flat rail the bolt does not pass through the leg, rail, floor, and a suitable structural member, or the floor has not been suitably reinforced

  Category: Seat belt installation checks . Reference 10.2 (p)

• Claw type seat mounting with inadequate means of securing claw (see note P)

  Category: Seat belt installation checks . Reference 10.2 (o)

• Lower anchorage’s less than 320mm apart (see note P)

  Category: Seat belt installation checks . Reference 10.2 (k)

• Retro-fitted three point belt fitted to a seat on which the leg and frame has not been suitably modified (see note K)

  Category: Seat belt installation checks . Reference 10.2 (i)

• Tubular frame legs or tubular “H” pattern legs which have not been reinforced with buttressing and diagonal bracing (see Diagram 6), or buttressing where a floor mounted belt is fitted close to a seat leg

  Category: Seat belt installation checks . Reference 10.2 (h)

• Retro-fitted three point belt which is not mounted on a suitable structure (see Diagram 5)

  Category: Seat belt installation checks . Reference 10.2 (g)

• A directly attached anchorage not attached to a load bearing member or without suitable reinforcement (see notes I, N and O)

  Category: Seat belt installation checks . Reference 10.2 (f)

• A tubular seat frame that has been drilled for the purpose of attaching a seat belt (see note F)

  Category: Seat belt installation checks . Reference 10.2 (e)

• A retractable step not operating correctly

  Category: Supplementary tests for buses and coaches . Reference 9.7 (b)

• A step or stair in such a condition as to affect the stability of passengers during use

  Category: Supplementary tests for buses and coaches . Reference 9.7 (a)(iii)

• A step or stair significantly damaged

  Category: Supplementary tests for buses and coaches . Reference 9.7 (a)(ii)

• A step or stair in a deteriorated condition

  Category: Supplementary tests for buses and coaches . Reference 9.7 (a)(i)

• A passenger grab handle insecure or unusable

  Category: Supplementary tests for buses and coaches . Reference 9.6 (b)(ii)

• A passenger grab handle defective

  Category: Supplementary tests for buses and coaches . Reference 9.6 (b)(i)

• No emergency exit provided (where one is required) or access blocked

  Category: Supplementary tests for buses and coaches . Reference 9.1.2 (d)

• Missing break glass hammer (where required)

  Category: Supplementary tests for buses and coaches . Reference 9.1.2 (c)

• An emergency exit sign missing

  Category: Supplementary tests for buses and coaches . Reference 9.1.2 (b)(ii)

• An emergency exit sign illegible or not in accordance with the requirements

  Category: Supplementary tests for buses and coaches . Reference 9.1.2 (b)(i)